2/2/2023 0 Comments N54l esxi 6.7![]() Create a Single vmkernel adapter for iSCSI – You must use an IP Address that has access to the QNAP NAS.Then in vSphere you will need to do the following. ![]() However if you wish to enable it select the iSCSI target, then choose the Action drop down menu and select Modify. Verify that Read/Write access is set to Yes.Īdditional iSCSI ACLs are not required when connecting a single host.ĬHAP Authentication is not required. You can do this by selecting the iSCSI ACL button, choosing the Default Policy and selecting Edit. Once you have created the iSCSI Target Volume, verify that the iSCSI ACL Default Policy allows Read/Write. When you are finished it will look similar to this: ![]() The document How to use QNAP NAS as a VMware Datastore via iSCSI was written for vSphere 4.0 and hasn’t yet been updated for vSphere 6.5 so I wanted to provide some simple instructions to help others.įollow the QNAP instructions How to create and use the iSCSI target service on a QNAP Turbo NAS to create the iSCSI Target Volume. A lot has changed in a year, including the NAS Operating System known as QTS. It has been awhile since I last configured iSCSI on my QNAP TS-251 network attached storage appliance. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |